Sfoglia per Autore
Evaluation of Graphene Nanoplatelets as a Microporous Layer Material for PEMFC: Performance and Durability Analysis
2019-01-01 Mariani, M.; Latorrata, S.; Gallo Stampino, P.; Dotelli, G.
Characterization of novel graphene-based microporous layers for Polymer Electrolyte Membrane Fuel Cells operating under low humidity and high temperature
2020-01-01 Mariani, M.; Latorrata, S.; Patrignani, S.; Gallo Stampino, P.; Dotelli, G.
Optimization of perfluoropolyether-based gas diffusion media preparation for PEM fuel cells
2020-01-01 Balzarotti, R.; Latorrata, S.; Mariani, M.; Gallo Stampino, P.; Dotelli, G.
Graphene-based microporous layers for enhanced performance in PEM fuel cells
2020-01-01 Latorrata, Saverio; Mariani, Marco; GALLO STAMPINO, Paola; Cristiani, Cinzia; Dotelli, Giovanni
Effect of printing parameters on the mechanical strength of green body from binder jetting additive manufacturing
2020-01-01 Mariani, Marco; Beltrami, Ruben; Meneghetti, Federico; Azzollini, Dario; Lecis, Nora
Mechanical and microstructural characterization of WC-Co consolidated by binder jetting additive manufacturing
2021-01-01 Mariani, Marco; Goncharov, Ivan; Mariani, Davide; De Gaudenzi, Gian Pietro; Popovich, Anatoly; Lecis, Nora; Vedani, Maurizio
Binder jetting 3D printing of 316 stainless steel: influence of process parameters on microstructural and mechanical properties
2021-01-01 Lecis, NORA FRANCESCA MARIA; Beltrami, Ruben; Mariani, Marco
Effects of process parameters, debinding and sintering on the microstructure of 316L stainless steel produced by binder jetting
2021-01-01 Lecis, N.; Mariani, M.; Beltrami, R.; Emanuelli, L.; Casati, R.; Vedani, M.; Molinari, A.
3D printing of fine alumina powders by binder jetting
2021-01-01 Mariani, Marco; Beltrami, Ruben; Brus, Paolo; Galassi, Carmen; Ardito, Raffaele; Lecis, Nora
The role of fluorinated polymers in the water management of proton exchange membrane fuel cells: A review
2021-01-01 Mariani, M.; Basso Peressut, A.; Latorrata, S.; Balzarotti, R.; Sansotera, M.; Dotelli, G.
Employment of Micro- and Nano-WS2 Structures to Enhance the Tribological Properties of Copper Matrix Composites
2021-01-01 Freschi, Marco; Di Virgilio, Matteo; Zanardi, Gabriele; Mariani, Marco; Lecis, Nora; Dotelli, Giovanni
Effect of printing parameters on sintered WC-Co components by binder jetting
2022-01-01 Mariani, Marco; Mariani, Davide; Pietro De Gaudenzi, Gian; Lecis, Nora
Tailoring α-alumina powder morphology through spray drying for cold consolidation by binder jetting
2022-01-01 Mariani, M.; Frias Blanco, G.; Mercadelli, E.; Sanchez-Herencia, A. J.; Galassi, C.; Lecis, N.; Ferrari, B.
Additive manufacturing of lead-free KNN by binder jetting
2022-01-01 Mariani, Marco; Beltrami, Ruben; Migliori, Emanuele; Cangini, Laura; Mercadelli, Elisa; Baldisserri, Carlo; Galassi, Carmen; Lecis, NORA FRANCESCA MARIA
Densification behaviour of pure copper processed through cold pressing and binder jetting under different atmospheres
2022-01-01 Romano, T.; Migliori, E.; Mariani, M.; Lecis, N.; Vedani, M.
Analysis of the Flatness Form Error in Binder Jetting Process as Affected by the Inclination Angle
2022-01-01 Zago, M; Lecis, N; Mariani, M; Cristofolini, I
Influence of chemically synthesized powder addition on K0.5Na0.5NbO3 ceramic's properties
2022-01-01 Migliori, E; Mercadelli, E; Beltrami, R; Mariani, M; Baldisserri, C; Galassi, C; Lecis, N
Investigation of second phase concentration effects on tribological and electrical properties of Cu–WS2 composites
2022-01-01 Freschi, M.; Di Virgilio, M.; Haiko, O.; Mariani, M.; Andena, L.; Lecis, N.; Komi, J.; Dotelli, G.
Graphene oxide-naphthalene sulfonate blends as possible proton exchange membranes
2022-01-01 Di Virgilio, M.; Basso Peressut, A.; Latorrata, S.; Mariani, M.; Dotelli, G.
Effects Of Feedstock Morphology And Composition On Binder Jetting Of 316L Stainless Steel: A Perspective On Circular Economy
2023-01-01 Mariani, Marco; Montipò, Luigi; Lecis, Nora
Additive Manufacturing of Piezoelectric Niobium-Doped Lead Zirconate Titanate (PZT-N) by Binder Jetting
2023-01-01 Mariani, M.; Mercadelli, E.; Cangini, L.; Baldisserri, C.; Galassi, C.; Capiani, C.; Lecis, N.
Tuning the Parameters of Cu−WS2 Composite Production via Powder Metallurgy: Evaluation of the Effects on Tribological Properties
2023-01-01 Freschi, Marco; Dragoni, Lara; Mariani, Marco; Haiko, Oskari; Kömi, Jukka; Lecis, Nora; Dotelli, Giovanni
Influence of shape distortion on the precision of holes in parts fabricated by metal binder jetting
2023-01-01 Zago, M.; Lecis, N.; Mariani, M.; Ucak, O. U.; Cristofolini, I.
Comparative analysis of gas atomised and recycled 316L stainless steel powders for Binder Jetting
2023-01-01 Mariani, M.; Salaheldin, K.; Grande, A.; Lecis, N.
Non-Conventional Hybrid Microporous Layers for Enhanced Performance and Durability of PEM Fuel Cells
2023-01-01 Latorrata, Saverio; Mariani, Marco; Basso Peressut, Andrea; Balzarotti, Riccardo; Dotelli, Giovanni
Sintering behaviour of 3D-printed 18K 5N gold alloy by binder jetting: a preliminary study
2024-01-01 Mariani, M.; Vario, T.; Salaheldin, K.; Annoni, M.; Lecis, N.
3D printing of potassium sodium niobate by binder jetting: Printing parameters optimisation and correlation to final porosity
2024-01-01 Bertolini, Francesco; Mariani, Marco; Mercadelli, Elisa; Baldisserri, Carlo; Galassi, Carmen; Capiani, Claudio; Ardito, Raffaele; Lecis, Nora
Effects of Sinter-HIP Temperature on Microstructure and Properties of WC–12Co Produced Using Binder Jetting
2024-01-01 Goncharov, Ivan; Mariani, Marco; De Gaudenzi, Gian Pietro; Popovich, Anatoliy; Lecis, Nora; Vedani, Maurizio
Binder Jetting of Lunar Regolith: 3D Printing and Densification
2024-01-01 Mariani, M.; Bertolini, F.; Isachenkov, M.; Galassi, C.; Lecis, N.; Grande, A. M.; Sala, G.
Analysis of ball milling time to produce self-lubricating copper-tungsten disulfide composite: best trade-off between tribological performance and electrical properties
2024-01-01 Freschi, M.; Di Virgilio, M.; Andena, L.; Mariani, M.; Haiko, O.; Kömi, J.; Lecis, N.; Dotelli, G.
Design challenges in leveraging binder jetting technology to innovate the medical instrument field
2024-01-01 Cocchi, Lorenzo; Mariani, Marco; Graziosi, Serena; Viganò, Roberto; Lecis, Nora
Binder Jetting‐based Metal Printing
2024-01-01 Mariani, Marco; Lecis, Nora; Mostafaei, Amir
Analysis of the causes determining dimensional and geometrical errors in 316L and 17-4PH stainless steel parts fabricated by metal binder jetting
2024-01-01 Zago, Marco; Lecis, Nora; Mariani, Marco; Cristofolini, Ilaria
A tribological assessment of 17-4PH stainless steel manufactured by binder jetting
2024-01-01 Fabiocchi, Lorenza; Mariani, Marco; LUCCHINI HUSPEK, Andrea; Pozzi, Matteo; Bestetti, Massimiliano; Graziosi, Serena; Lecis, Nora
Inkjet Printing of Cobalt Ferrite for Hard Ferromagnetic Thick Films Manufacturing
2024-01-01 Mariani, Marco; Cervellera, Francesco; Migliori, Emanuele; Maspero, Federico; Bernasconi, Roberto; Galassi, Carmen; Magagnin, Luca; Lecis, Nora
Low-Energy High-Current Pulsed Electron Beam Surface Treatment on the Tribological Behavior of 17-4PH Steel Produced via Binder Jetting
2025-01-01 Fabiocchi, Lorenza; Mariani, Marco; Lucchini Huspek, Andrea; Pozzi, Matteo; Bestetti, Massimiliano; Lecis, Nora
Assessment of microchannel architectures accuracy in stainless steel 316L/red mud composite parts fabricated by binder jetting
2025-01-01 Shang, Naiqi; Zago, Marco; Mariani, Marco; Dall'Osto, Gianluca; Lecis, Nora; Fontanari, Vigilio; Cristofolini, Ilaria; Mombelli, Davide
Manufacturing of surgical instruments by Binder Jetting 3D printing: a feasibility study
2025-01-01 Candidori, Sara; Cocchi, Lorenzo; Mariani, Marco; Bestetti, Massimiliano; Viganò, Roberto; Graziosi, Serena; Lecis, Nora
Alumina-based interpenetrating phase composites by binder jetting: effects of powder multimodal distributions on porous preforms formation and copper-infiltrated composite performance
2025-01-01 Mariani, Marco; Bertolini, Francesco; Fabiocchi, Lorenza; Mercadelli, Elisa; Galassi, Carmen; Lecis, Nora
Effects of solution annealing and ageing treatments on the microstructure and mechanical properties of 17-4PH steel produced by binder jetting
2025-01-01 Salaheldin, Karim; Abdelwahed, Marwan; Mariani, Marco; Grande, Antonio Mattia; Lecis, Nora
Microstructural development via synergic application of Binder jJetting and Quenching and Partitioning (QP) on commercial AISI 4340
2025-01-01 Belfi, M.; Mariani, M.; Martin, P.; Santofimia, M.; Gruttadauria, A.; Deirmina, F.; Lecis, N.; Barella, S.
Magnetic beneficiation – A novel approach to facilitate additive manufacturing of lunar regolith ceramics by vat photopolymerization
2025-01-01 Isachenkov, Maxim; Grande, Antonio Mattia; Mariani, Marco; Lecis, Nora; Casati, Riccardo; Silvestroni, Laura; Sala, Giuseppe
Spray drying granulation of potassium sodium niobate (KNN) for binder jetting: Feedstock preparation and influence on sintered material properties
2025-01-01 Mariani, Marco; Bertolini, Francesco; Mercadelli, Elisa; Blanco, Guillermo Frias; Baldisserri, Carlo; Sanchez-Herencia, Antonio Javier; Galassi, Carmen; Ferrari, Begoña; Lecis, Nora
Legenda icone
- file ad accesso aperto
- file disponibili sulla rete interna
- file disponibili agli utenti autorizzati
- file disponibili solo agli amministratori
- file sotto embargo
- nessun file disponibile