This paper aims to explain in the simplest possible way how tires influence, to the greatest extent, the dynamic behavior of cars during power-on or power-off. Starting from the ISO 4138 steering pad test, controlled power-on and power-off manoeuvers are introduced to reproduce typical manoeuvers relevant for active safety. A new extended version of handling diagram theory is used to make clear how tires determine the oversteer and understeer character of a car. A simple two-degree-of-freedom analytical vehicle model and a complex high-fidelity fourteen-degree-of-freedom model have been used. Driver-in-the-Loop simulations were performed at a dynamic driving simulator. This study considers three representative driveline configurations, namely front-wheel drive (FWD), rear-wheel drive (RWD), and all-wheel drive (AWD). A key outcome of this study is that the fundamental mechanisms governing understeer and oversteer behavior can be effectively captured using a simple two-degree-of-freedom model combined with appropriate tire characteristics. The results show that the handling diagrams are a proper tool to describe handling manoeuvers during power-on or power-off. Variations in understeer and oversteer behavior induced by power modulation can be interpreted as a direct consequence of tire characteristics. The findings of this work highlight—once more—the pivotal role of the tire in vehicle dynamics and active safety.
Understanding Vehicle Handling During Power-On or Power-Off: A Simple Approach Based on Tire Mechanical Behavior
Gao, Ruoao;Mastinu, Gianpiero;Stabile, Pietro;
2026-01-01
Abstract
This paper aims to explain in the simplest possible way how tires influence, to the greatest extent, the dynamic behavior of cars during power-on or power-off. Starting from the ISO 4138 steering pad test, controlled power-on and power-off manoeuvers are introduced to reproduce typical manoeuvers relevant for active safety. A new extended version of handling diagram theory is used to make clear how tires determine the oversteer and understeer character of a car. A simple two-degree-of-freedom analytical vehicle model and a complex high-fidelity fourteen-degree-of-freedom model have been used. Driver-in-the-Loop simulations were performed at a dynamic driving simulator. This study considers three representative driveline configurations, namely front-wheel drive (FWD), rear-wheel drive (RWD), and all-wheel drive (AWD). A key outcome of this study is that the fundamental mechanisms governing understeer and oversteer behavior can be effectively captured using a simple two-degree-of-freedom model combined with appropriate tire characteristics. The results show that the handling diagrams are a proper tool to describe handling manoeuvers during power-on or power-off. Variations in understeer and oversteer behavior induced by power modulation can be interpreted as a direct consequence of tire characteristics. The findings of this work highlight—once more—the pivotal role of the tire in vehicle dynamics and active safety.| File | Dimensione | Formato | |
|---|---|---|---|
|
vehicles-08-00224.pdf
accesso aperto
:
Publisher’s version
Dimensione
5.34 MB
Formato
Adobe PDF
|
5.34 MB | Adobe PDF | Visualizza/Apri |
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.



