Reducing emissions in the building energy sector can be achieved through alternative fuels or electrification. Hydrogen can be a viable energy source for heating and cooling systems with zero direct emissions. This study investigates the design of hydrogen-powered systems for heating and cooling production with zero-emission, focusing on thermodynamic simulation and techno-economic analysis. Thermodynamic analysis indicates that the most efficient energy conversion approach involves transforming hydrogen into mechanical energy, recovering the resulting heat, and using it to drive a heat pump. The systems investigated are primarily powered by a fuel cell, with alternatives including an internal combustion engine and a gas turbine for comparison. Performance is assessed using the hydrogen conversion ratio (HCR), defined as the useful thermal power relative to the hydrogen input based on its lower heating value. The systems are modeled using a lumped approach or Aspen Plus depending on the system complexity. Fuel cell-based systems show the highest HCR, reaching 2.371 for heating and 2.066 for cooling. Advanced configurations that recover heat from a Rankine cycle offer performance gains, mainly for cooling. Rankine cycle poses technical challenges due to high temperatures and low fluid density, especially when water or methanol is used as the working fluid. Despite their performance, these advanced systems remain economically uncompetitive compared to simpler solutions using an internal combustion engine with a vapor compression heat pump. The study concludes that the most viable hydrogen-based systems rely on efficient conversion of hydrogen to electricity or mechanical energy, subsequently powering heat pumps.

Hydrogen for off-grid heating and cooling: Thermodynamic limits, system configurations, and techno-economic trade-offs

Dalberto, Thomas;Valenti, Gianluca;Colbertaldo, Paolo
2026-01-01

Abstract

Reducing emissions in the building energy sector can be achieved through alternative fuels or electrification. Hydrogen can be a viable energy source for heating and cooling systems with zero direct emissions. This study investigates the design of hydrogen-powered systems for heating and cooling production with zero-emission, focusing on thermodynamic simulation and techno-economic analysis. Thermodynamic analysis indicates that the most efficient energy conversion approach involves transforming hydrogen into mechanical energy, recovering the resulting heat, and using it to drive a heat pump. The systems investigated are primarily powered by a fuel cell, with alternatives including an internal combustion engine and a gas turbine for comparison. Performance is assessed using the hydrogen conversion ratio (HCR), defined as the useful thermal power relative to the hydrogen input based on its lower heating value. The systems are modeled using a lumped approach or Aspen Plus depending on the system complexity. Fuel cell-based systems show the highest HCR, reaching 2.371 for heating and 2.066 for cooling. Advanced configurations that recover heat from a Rankine cycle offer performance gains, mainly for cooling. Rankine cycle poses technical challenges due to high temperatures and low fluid density, especially when water or methanol is used as the working fluid. Despite their performance, these advanced systems remain economically uncompetitive compared to simpler solutions using an internal combustion engine with a vapor compression heat pump. The study concludes that the most viable hydrogen-based systems rely on efficient conversion of hydrogen to electricity or mechanical energy, subsequently powering heat pumps.
2026
ATI Annual Congress 2026 09/09/2026 - 11/09/2026 Milan, Italy
File in questo prodotto:
File Dimensione Formato  
Dalberto_Etal-2026-Hydrogen_OffGrid_HeatingCooling.pdf

accesso aperto

Descrizione: ATI_2026_HyHP
: Publisher’s version
Dimensione 1.79 MB
Formato Adobe PDF
1.79 MB Adobe PDF Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11311/1333441
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
  • OpenAlex ND
social impact