This work assesses a process for the conversion of biogas into methanol, leveraging electrified steam methane reforming (eSMR) technology sustained by renewable electricity. This approach enables the design of flexible and compact reactors while avoiding biogas combustion and the loss of valuable biogenic carbon. The chemical process was simulated under both design and part-load conditions, evaluating various operating points. These include the introduction of hydrogen to regulate syngas composition and the utilisation of a biogas-fuelled Internal Combustion Engine (ICE) to self-generate electricity during periods of low availability of renewable power. The chemical island was integrated with intermittent renewable energy sources, Battery Energy Storage Systems (BESS), gas and liquid storage units. The overall configuration was optimised through annual simulations with hourly resolution, aiming to maximise the Net Present Value (NPV). The analysis considered two European locations, multiple economic scenarios, and different degrees of system flexibility, while evaluating the impact of methanol selling price and project scale on economic performance. From a technical perspective, the electrification of the reformer increases carbon efficiency from 30-50% typical of a conventional Fired Tubular Reformer (FTR), up to 70%. Moreover, by integrating electrolytic hydrogen, carbon efficiencies approaching 100% can be achieved, albeit at the expense of higher capital costs and energy consumption. Indeed, assuming an electrolyser cost of 1000-1300 & euro; kW-1, increasing the total product yield becomes profitable only when the methanol selling price exceeds approximately 1000 & euro; t-1. Notably, the operational flexibility of the chemical island enables a reduction in the production cost of up to 24% compared to an inflexible plant. Finally, transitioning to centralised biogas hubs leverages economies of scale and reduced biogas costs, driving the specific methanol production cost down from 760-1009 & euro; t-1 for small-scale distributed plants (2.1 MWLHV input) to 529-663 & euro; t-1 for large-scale operations (21 MWLHV input).

Biogas and power to methanol via electrified steam methane reforming: a techno-economic optimisation

Nava, Andrea;Romano, Matteo C.
2026-01-01

Abstract

This work assesses a process for the conversion of biogas into methanol, leveraging electrified steam methane reforming (eSMR) technology sustained by renewable electricity. This approach enables the design of flexible and compact reactors while avoiding biogas combustion and the loss of valuable biogenic carbon. The chemical process was simulated under both design and part-load conditions, evaluating various operating points. These include the introduction of hydrogen to regulate syngas composition and the utilisation of a biogas-fuelled Internal Combustion Engine (ICE) to self-generate electricity during periods of low availability of renewable power. The chemical island was integrated with intermittent renewable energy sources, Battery Energy Storage Systems (BESS), gas and liquid storage units. The overall configuration was optimised through annual simulations with hourly resolution, aiming to maximise the Net Present Value (NPV). The analysis considered two European locations, multiple economic scenarios, and different degrees of system flexibility, while evaluating the impact of methanol selling price and project scale on economic performance. From a technical perspective, the electrification of the reformer increases carbon efficiency from 30-50% typical of a conventional Fired Tubular Reformer (FTR), up to 70%. Moreover, by integrating electrolytic hydrogen, carbon efficiencies approaching 100% can be achieved, albeit at the expense of higher capital costs and energy consumption. Indeed, assuming an electrolyser cost of 1000-1300 & euro; kW-1, increasing the total product yield becomes profitable only when the methanol selling price exceeds approximately 1000 & euro; t-1. Notably, the operational flexibility of the chemical island enables a reduction in the production cost of up to 24% compared to an inflexible plant. Finally, transitioning to centralised biogas hubs leverages economies of scale and reduced biogas costs, driving the specific methanol production cost down from 760-1009 & euro; t-1 for small-scale distributed plants (2.1 MWLHV input) to 529-663 & euro; t-1 for large-scale operations (21 MWLHV input).
2026
File in questo prodotto:
File Dimensione Formato  
2026 - Nava, Romano.pdf

accesso aperto

Descrizione: Manuscript
: Publisher’s version
Dimensione 3.04 MB
Formato Adobe PDF
3.04 MB Adobe PDF Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11311/1322765
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 0
  • ???jsp.display-item.citation.isi??? 0
  • OpenAlex 0
social impact