Digital-twin-based active input refinement for insertion loss estimation and QoT optimization in C and C + L networks

Quality of transmission (QoT) prediction is a fundamental function in optical networks. It is typically embedded within a digital twin and used for operational tasks, including service establishment, service rerouting, and (per-channel or per-amplifier) power management to optimize the working point of services and hence to maximize their capacity. Inaccuracy in QoT prediction results in additional, unwanted design margins. A key contributor to QoT inaccuracy is the uncertain knowledge of fiber insertion loss, e.g., the attenuation due to connector losses at the beginning or at the end of each fiber span, as such loss cannot be directly monitored. Indeed, insertion losses drive the choice of the launch power in fiber spans, which in turn drive key physical effects, including the Kerr and stimulated Raman scattering (SRS) effects, which affect services’ QoT. It is thus important to estimate (and detect possibly anomalous) fiber insertion losses at each span. We thereby propose a novel active input refinement (AIR) technique using active probing to estimate insertion losses in C and C L systems. Here, active probing consists of adjusting amplifier gains span by span to slightly alter SRS. The amount of adjustment must be sufficient to be measurable (such that insertion losses can be inferred from the measures) but small enough to have a negligible impact on running services in a live network. The method is validated by simulations on a European network with 30 optical multiplex sections (OMSs) in C and C L configurations and by lab experiments on a C-band network, demonstrating that AIR significantly improves insertion loss estimation, network QoT optimization, and QoT prediction compared with other state-of-the-art monitoring techniques. This work underscores the critical role of accurate estimation of QoT inputs in enhancing optical network performance.