A novel experiment has been conceived at Politecnico di Milano for the study of the flow within and downstream of supersonic cascades of Organic Rankine Cycle (ORC) turbines. This paper documents the first phase of the research, focused on the preliminary tests and studies performed by operating the facility with nitrogen as working fluid, to demonstrate the technical relevance of the experiment and the validity of the measurement system in a simplified thermodynamic condition. The set of measured data includes, beside the inlet total thermodynamic state, eight static pressure values obtained via taps manufactured on the test section rear end-wall, both within the bladed and semi-bladed region of the cascade, as well as a total pressure probe to retrieve the cascade performance. A double-passage Schlieren equipment was also employed to visualize the density gradients. Experiments show an outstanding repeatability, indicate a quasi -steady cascade operation during the blow-down process for all the pressure signal considered, and demonstrate a remarkable periodicity among two consecutive channels also in off-design conditions. Experimental data were also compared with CFD simulations, resulting in an excellent agreement for the pressure data acquired both within and downstream of the cascade.

Nitrogen Experiments on a Supersonic Linear Cascade For ORC Applications

Manfredi M.;Spinelli A.;Persico G.;Gaetani P.;Dossena V.
2023-01-01

Abstract

A novel experiment has been conceived at Politecnico di Milano for the study of the flow within and downstream of supersonic cascades of Organic Rankine Cycle (ORC) turbines. This paper documents the first phase of the research, focused on the preliminary tests and studies performed by operating the facility with nitrogen as working fluid, to demonstrate the technical relevance of the experiment and the validity of the measurement system in a simplified thermodynamic condition. The set of measured data includes, beside the inlet total thermodynamic state, eight static pressure values obtained via taps manufactured on the test section rear end-wall, both within the bladed and semi-bladed region of the cascade, as well as a total pressure probe to retrieve the cascade performance. A double-passage Schlieren equipment was also employed to visualize the density gradients. Experiments show an outstanding repeatability, indicate a quasi -steady cascade operation during the blow-down process for all the pressure signal considered, and demonstrate a remarkable periodicity among two consecutive channels also in off-design conditions. Experimental data were also compared with CFD simulations, resulting in an excellent agreement for the pressure data acquired both within and downstream of the cascade.
2023
Proceedings of the XXVI Biennial Symposium on Measuring Techniques in Turbomachinery (MTT2622) 28/09/2022 - 30/09/2022 Pisa, Italy
File in questo prodotto:
File Dimensione Formato  
179-JPh_MTT22-N2CTROVA.pdf

accesso aperto

Descrizione: Articolo principale
: Publisher’s version
Dimensione 6.85 MB
Formato Adobe PDF
6.85 MB Adobe PDF Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11311/1246025
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 0
  • ???jsp.display-item.citation.isi??? 0
social impact