The paper deals with the analysis of FRCM (Fiber Reinforced Cementitious Matrix) reinforced masonry panels in simple bending by means of a two-step homogenization approach. In the first step, homogenization is performed on unreinforced masonry through a straightforward procedure already validated for in-plane loaded FRCM reinforced panels, where the elementary cell is discretized by means of 24 CST elastic elements (bricks) and joints are reduced to interfaces with holonomic softening behavior. Out-of-plane homogenized quantities (moment-curvature relationships) are then obtained by simple on-thickness integration. At a structural level (step two), masonry is modeled with rigid elements and homogenized torsional and bending springs, whereas FRCM by two noded trusses with equivalent mechanical properties evaluated on the base of experimental data available. The implementation is handled within the commercial FE software Abaqus. As a matter of fact, the Concrete Damage Plasticity Model (CDP) already implemented into the code allows taking into account the progressive change of stiffness of brittle supports when subjected to alternate cracking-crushing mechanisms, as well as to properly deal with the cyclic behavior. The validation of the procedure is conducted against a series of full scale masonry walls tested by Nanni and co-workers at the University of Miami. A tri-dimensional heterogeneous micro-modeling technique is also used for both unreinforced and FRCM strengthened panels to further validate the homogenization model proposed. The discretization adopted is adjusted in order to allow the presence of two eight-noded FEs along the mortar joint thickness. FRCM is modeled by means of truss elements whose mechanical properties are calibrated to reproduce the behavior of the textile net embedded into the cementitious matrix. The elastic and inelastic mechanical parameters of all the materials involved into the numerical analyses have been calibrated in agreement with laboratory tests, when available. Pros and cons of the two numerical strategies are discussed mostly with respect to the accuracy of the outcomes in terms of global behavior of the panels and damage mechanisms, as well as with respect to the computational effort required by the two approaches to complete the analyses.

Simple numerical homogenization model for FRCM reinforced masonry panels subjected to out-of-plane loads

Bertolesi, Elisa;Milani, Gabriele;Poggi, Carlo
2017-01-01

Abstract

The paper deals with the analysis of FRCM (Fiber Reinforced Cementitious Matrix) reinforced masonry panels in simple bending by means of a two-step homogenization approach. In the first step, homogenization is performed on unreinforced masonry through a straightforward procedure already validated for in-plane loaded FRCM reinforced panels, where the elementary cell is discretized by means of 24 CST elastic elements (bricks) and joints are reduced to interfaces with holonomic softening behavior. Out-of-plane homogenized quantities (moment-curvature relationships) are then obtained by simple on-thickness integration. At a structural level (step two), masonry is modeled with rigid elements and homogenized torsional and bending springs, whereas FRCM by two noded trusses with equivalent mechanical properties evaluated on the base of experimental data available. The implementation is handled within the commercial FE software Abaqus. As a matter of fact, the Concrete Damage Plasticity Model (CDP) already implemented into the code allows taking into account the progressive change of stiffness of brittle supports when subjected to alternate cracking-crushing mechanisms, as well as to properly deal with the cyclic behavior. The validation of the procedure is conducted against a series of full scale masonry walls tested by Nanni and co-workers at the University of Miami. A tri-dimensional heterogeneous micro-modeling technique is also used for both unreinforced and FRCM strengthened panels to further validate the homogenization model proposed. The discretization adopted is adjusted in order to allow the presence of two eight-noded FEs along the mortar joint thickness. FRCM is modeled by means of truss elements whose mechanical properties are calibrated to reproduce the behavior of the textile net embedded into the cementitious matrix. The elastic and inelastic mechanical parameters of all the materials involved into the numerical analyses have been calibrated in agreement with laboratory tests, when available. Pros and cons of the two numerical strategies are discussed mostly with respect to the accuracy of the outcomes in terms of global behavior of the panels and damage mechanisms, as well as with respect to the computational effort required by the two approaches to complete the analyses.
2017
Key Engineering Materials
9783035711646
Fiber reinforced cementitious matrix FRCM; Homogenization; Micro-modeling heterogeneous approach; Out of plane cyclic behavior; Materials Science (all); Mechanics of Materials; Mechanical Engineering
File in questo prodotto:
File Dimensione Formato  
2017_Murico_Bertolesi_Milani_Ghiassi_Poggi.pdf

Accesso riservato

: Publisher’s version
Dimensione 875.39 kB
Formato Adobe PDF
875.39 kB Adobe PDF   Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11311/1050508
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 4
  • ???jsp.display-item.citation.isi??? ND
social impact