The mechanical response of the cornea subjected to a non-contact air-jet tonometry diag- nostic test represents an interplay between its geometry, the corneal material behavior and the loading. The objective is to study this interplay to better understand and interpret the re- sults obtained with a non-contact tonometry test. A patient-specific finite element model of a healthy eye, accounting for the load free configuration, was used. The corneal tissue was modeled as an anisotropic hyperelastic material with two preferential directions. Three dif- ferent sets of parameters within the human experimental range obtained from inflation tests were considered. The influence of the IOP was studied by considering four pressure levels (10–28 mmHg) whereas the influence of corneal thickness was studied by inducing a uni- form variation (300–600 microns). A Computer Fluid Dynamics (CFD) air-jet simulation de- termined pressure loading exerted on the anterior corneal surface. The maximum apex displacement showed a linear variation with IOP for all materials examined. On the contrary, the maximum apex displacement followed a cubic relation with corneal thickness. In addi- tion, a significant sensitivity of the apical displacement to the corneal stiffness was also ob- tained. Explanation to this behavior was found in the fact that the cornea experiences bending when subjected to an air-puff loading, causing the anterior surface to work in com- pression whereas the posterior surface works in tension. Hence, collagen fibers located at the anterior surface do not contribute to load bearing. Non-contact tonometry devices give useful information that could be misleading since the corneal deformation is the result of the interaction between the mechanical properties, IOP, and geometry. Therefore, a non- contact tonometry test is not sufficient to evaluate their individual contribution and a com- plete in-vivo characterization would require more than one test to independently determine the membrane and bending corneal behavior.

Coupled biomechanical response of the cornea assessed by non-contact tonometry. A simulation study

RODRIGUEZ MATAS, JOSE FELIX;
2015-01-01

Abstract

The mechanical response of the cornea subjected to a non-contact air-jet tonometry diag- nostic test represents an interplay between its geometry, the corneal material behavior and the loading. The objective is to study this interplay to better understand and interpret the re- sults obtained with a non-contact tonometry test. A patient-specific finite element model of a healthy eye, accounting for the load free configuration, was used. The corneal tissue was modeled as an anisotropic hyperelastic material with two preferential directions. Three dif- ferent sets of parameters within the human experimental range obtained from inflation tests were considered. The influence of the IOP was studied by considering four pressure levels (10–28 mmHg) whereas the influence of corneal thickness was studied by inducing a uni- form variation (300–600 microns). A Computer Fluid Dynamics (CFD) air-jet simulation de- termined pressure loading exerted on the anterior corneal surface. The maximum apex displacement showed a linear variation with IOP for all materials examined. On the contrary, the maximum apex displacement followed a cubic relation with corneal thickness. In addi- tion, a significant sensitivity of the apical displacement to the corneal stiffness was also ob- tained. Explanation to this behavior was found in the fact that the cornea experiences bending when subjected to an air-puff loading, causing the anterior surface to work in com- pression whereas the posterior surface works in tension. Hence, collagen fibers located at the anterior surface do not contribute to load bearing. Non-contact tonometry devices give useful information that could be misleading since the corneal deformation is the result of the interaction between the mechanical properties, IOP, and geometry. Therefore, a non- contact tonometry test is not sufficient to evaluate their individual contribution and a com- plete in-vivo characterization would require more than one test to independently determine the membrane and bending corneal behavior.
2015
corneal mechanics; non contact tonometry; non linear finite elements
File in questo prodotto:
File Dimensione Formato  
2015_PONE_Ariza.pdf

accesso aperto

Descrizione: articolo principale
: Publisher’s version
Dimensione 1.72 MB
Formato Adobe PDF
1.72 MB Adobe PDF Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11311/965298
Citazioni
  • ???jsp.display-item.citation.pmc??? 27
  • Scopus 84
  • ???jsp.display-item.citation.isi??? 66
social impact