Current research on transparent conductive oxides (TCOs) is focusing on indium-free TCOs, such as Al-doped ZnO (AZO), as an alternative to indium–tin oxide. In this work, AZO thin films were grown by Pulsed Laser Deposition at room temperature in oxygen atmosphere. The O2 pressure was varied from 0.01 Pa to 10 Pa, highlighting the effects of defect formation and oxygen vacancies on the film properties. Structural properties were characterized by X-ray diffraction and Scanning Electron Microscopy, while functional properties were characterized by measurement of electrical conductivity, Hall mobility, carrier density and optical transmission. At an optimal deposition pressure of 2 Pa, optical transparency in the visible range and minimum resistivity (4.5 ∙10−4 Ω cm) were found, comparable to state-of-the-art TCOs. Mean value of visible transparency was shown to increase with increasing pressure, up to 88% at a deposition pressure of 10 Pa.

Structural and functional properties of Al:ZnO thin films grown by Pulsed Laser Deposition at room temperature

GONDONI, PAOLO;RUSSO, VALERIA;BOTTANI, CARLO ENRICO;LI BASSI, ANDREA;CASARI, CARLO SPARTACO
2012-01-01

Abstract

Current research on transparent conductive oxides (TCOs) is focusing on indium-free TCOs, such as Al-doped ZnO (AZO), as an alternative to indium–tin oxide. In this work, AZO thin films were grown by Pulsed Laser Deposition at room temperature in oxygen atmosphere. The O2 pressure was varied from 0.01 Pa to 10 Pa, highlighting the effects of defect formation and oxygen vacancies on the film properties. Structural properties were characterized by X-ray diffraction and Scanning Electron Microscopy, while functional properties were characterized by measurement of electrical conductivity, Hall mobility, carrier density and optical transmission. At an optimal deposition pressure of 2 Pa, optical transparency in the visible range and minimum resistivity (4.5 ∙10−4 Ω cm) were found, comparable to state-of-the-art TCOs. Mean value of visible transparency was shown to increase with increasing pressure, up to 88% at a deposition pressure of 10 Pa.
2012
File in questo prodotto:
File Dimensione Formato  
gondoni_TSF11.pdf

Accesso riservato

: Post-Print (DRAFT o Author’s Accepted Manuscript-AAM)
Dimensione 461.64 kB
Formato Adobe PDF
461.64 kB Adobe PDF   Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11311/607949
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 73
  • ???jsp.display-item.citation.isi??? 66
social impact