Many applications of IRT on buildings require active approach. The solicitation has to be properly calculated, and the application has to take in account the optical characteristics of the surface and its thermal properties. In fact, non-homogeneities of the surface definitively affect the absorbance and reflectance of materials, as shown in literature. Therefore, in case of different colors like artistic paintings, dark stains and salts deposition a convection heating results more effective for IRT inspection, because it does not stimulate different localized absorption due to the colors. Using fan coil heaters, major difficulty is to obtain an even heating on the wall under inspection. The laboratory tests permitted to verify that the strength of rising warm air is higher than the one due to the heater ventilation. As a consequence, the effects of heating on the wall start from the upper part and decrease in a non-proportional way to the bottom. On the other side, thermal flux from a heater changes direction according to the geometry of the room, ambient conditions (initial temperature of the air, openings, etc), technical characteristics of the heater (power, speed of the fan, shape, etc) and its location (orientation, elevation, distance from the surface under investigation, etc). In addition, the increase of air temperature does not directly correspond to the increase of the surface temperature. The paper shows the characterization of a convective heating source, by laboratory measurements; to map the distribution of heat in time, the 14.000-26.000 kcal/h heater flux was measured following a 3D grid, by anemometers, probes, and IR Thermography.

IRT analysis on historic buildings: towards a controlled convection heating

Rosina, Elisabetta;Ludwig, N.;Redaelli, V.;DELLA TORRE, Stefano;D'Ascola, S.;Catalano, M.;
2005-01-01

Abstract

Many applications of IRT on buildings require active approach. The solicitation has to be properly calculated, and the application has to take in account the optical characteristics of the surface and its thermal properties. In fact, non-homogeneities of the surface definitively affect the absorbance and reflectance of materials, as shown in literature. Therefore, in case of different colors like artistic paintings, dark stains and salts deposition a convection heating results more effective for IRT inspection, because it does not stimulate different localized absorption due to the colors. Using fan coil heaters, major difficulty is to obtain an even heating on the wall under inspection. The laboratory tests permitted to verify that the strength of rising warm air is higher than the one due to the heater ventilation. As a consequence, the effects of heating on the wall start from the upper part and decrease in a non-proportional way to the bottom. On the other side, thermal flux from a heater changes direction according to the geometry of the room, ambient conditions (initial temperature of the air, openings, etc), technical characteristics of the heater (power, speed of the fan, shape, etc) and its location (orientation, elevation, distance from the surface under investigation, etc). In addition, the increase of air temperature does not directly correspond to the increase of the surface temperature. The paper shows the characterization of a convective heating source, by laboratory measurements; to map the distribution of heat in time, the 14.000-26.000 kcal/h heater flux was measured following a 3D grid, by anemometers, probes, and IR Thermography.
2005
Thermosense XXVII, SPIE procedings
0-8194-5767-1
File in questo prodotto:
File Dimensione Formato  
2005_Thermosense.pdf

Accesso riservato

Dimensione 7.28 MB
Formato Adobe PDF
7.28 MB Adobe PDF   Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11311/536108
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 2
  • ???jsp.display-item.citation.isi??? 2
social impact