This paper addresses the design and optimization of thermal actuators employed in a novel MEMS-based material testing system. The testing system is designed to measure the mechanical properties of a variety of materials/structures from thin films to one-dimensional structures, e.g. carbon nanotubes (CNTs) and nanowires (NWs). It includes a thermal actuator and a capacitive load sensor with a specimen in-between. The thermal actuator consists of a number of V-shaped beams anchored at both ends. It is capable of generating tens of milli-Newton force and a few micrometers displacement depending on the beams’ angle and their number. Analytical expressions of the actuator thermomechanical response are derived and discussed. From these expressions, a number of design criteria are drawn and used to optimize the device response. The analytical predictions are compared with both finite element multiphysics analysis (FEA) and experiments. To demonstrate the actuator performance, polysilicon freestanding specimens cofabricated with the testing system are tested.

A thermal actuator for nanoscale in-Situ microscopic testing: design and characterization.

CORIGLIANO, ALBERTO;
2006-01-01

Abstract

This paper addresses the design and optimization of thermal actuators employed in a novel MEMS-based material testing system. The testing system is designed to measure the mechanical properties of a variety of materials/structures from thin films to one-dimensional structures, e.g. carbon nanotubes (CNTs) and nanowires (NWs). It includes a thermal actuator and a capacitive load sensor with a specimen in-between. The thermal actuator consists of a number of V-shaped beams anchored at both ends. It is capable of generating tens of milli-Newton force and a few micrometers displacement depending on the beams’ angle and their number. Analytical expressions of the actuator thermomechanical response are derived and discussed. From these expressions, a number of design criteria are drawn and used to optimize the device response. The analytical predictions are compared with both finite element multiphysics analysis (FEA) and experiments. To demonstrate the actuator performance, polysilicon freestanding specimens cofabricated with the testing system are tested.
2006
MEMS; thermal actuator; nanoscale testing
File in questo prodotto:
File Dimensione Formato  
CIVR-Corigliano2.pdf

Accesso riservato

: Post-Print (DRAFT o Author’s Accepted Manuscript-AAM)
Dimensione 1.81 MB
Formato Adobe PDF
1.81 MB Adobe PDF   Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11311/261604
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 225
  • ???jsp.display-item.citation.isi??? 194
social impact