Electret nanogenerators have emerged as a promising technology for harvesting vibration energy to power low-consumption electronics. This study develops two improved equivalent-circuit models for freestanding electret nanogenerators featuring eccentric and centripetal electrode layouts of equal spacing. Unlike conventional simplified models neglecting detailed electrode configurations, the proposed models explicitly incorporate geometry-dependent overlapping-area evolution, thereby improving the prediction accuracy of output characteristics, particularly for high electrode-number configurations. Analytical expressions for the output current, voltage, and average power of both configurations are derived using Kirchhoff's Current Law. Parametric analyses quantify the effect of key structural variables, and the models are validated through laboratory experiments. Results demonstrate good agreement between theory and experiment when the net charge density is adopted. The proposed models provide higher accuracy in predicting the effects of structural and electrical parameters on freestanding electret nanogenerator outputs. A smaller inner radius, shorter electrode spacing, reduced generator capacitance, higher rotational speed, and increased surface charge density could enhance the average power output of the freestanding electret nanogenerators. The measured maximum power is 1.14 mW with an optimal load resistance of 2.9 MΩ. The rotation-frequency response of the freestanding electret nanogenerators exhibits an ultra-high sensitivity of 13.4 rpm/Hz with a good linearity coefficient of determination of 0.93. The proposed models can effectively describe the charge transfer behavior and provide useful guidance for geometry optimization and performance prediction of the freestanding electret nanogenerators. The proposed analytical framework may facilitate future applications in self-powered sensing systems, distributed energy harvesting devices, and structural health monitoring technologies.

Improved modeling, parametric analysis, and experimental validation of freestanding rotary electret nanogenerator

Huang, Weiyuan;Rosso, Michele;Corigliano, Alberto;
2026-01-01

Abstract

Electret nanogenerators have emerged as a promising technology for harvesting vibration energy to power low-consumption electronics. This study develops two improved equivalent-circuit models for freestanding electret nanogenerators featuring eccentric and centripetal electrode layouts of equal spacing. Unlike conventional simplified models neglecting detailed electrode configurations, the proposed models explicitly incorporate geometry-dependent overlapping-area evolution, thereby improving the prediction accuracy of output characteristics, particularly for high electrode-number configurations. Analytical expressions for the output current, voltage, and average power of both configurations are derived using Kirchhoff's Current Law. Parametric analyses quantify the effect of key structural variables, and the models are validated through laboratory experiments. Results demonstrate good agreement between theory and experiment when the net charge density is adopted. The proposed models provide higher accuracy in predicting the effects of structural and electrical parameters on freestanding electret nanogenerator outputs. A smaller inner radius, shorter electrode spacing, reduced generator capacitance, higher rotational speed, and increased surface charge density could enhance the average power output of the freestanding electret nanogenerators. The measured maximum power is 1.14 mW with an optimal load resistance of 2.9 MΩ. The rotation-frequency response of the freestanding electret nanogenerators exhibits an ultra-high sensitivity of 13.4 rpm/Hz with a good linearity coefficient of determination of 0.93. The proposed models can effectively describe the charge transfer behavior and provide useful guidance for geometry optimization and performance prediction of the freestanding electret nanogenerators. The proposed analytical framework may facilitate future applications in self-powered sensing systems, distributed energy harvesting devices, and structural health monitoring technologies.
2026
Electret
Energy harvesting
Freestanding
Nanogenerator
Rotary generator
File in questo prodotto:
File Dimensione Formato  
Renewable_Energy_IRIS_compresso.pdf

Accesso riservato

Dimensione 1.16 MB
Formato Adobe PDF
1.16 MB Adobe PDF   Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11311/1333533
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 1
  • ???jsp.display-item.citation.isi??? 1
  • OpenAlex 1
social impact