Annular reactors are a well-established configuration for kinetic investigations under high space velocity and high temperature conditions, where external mass transfer has an impact on the observed reaction rate. Comparable annular flow configurations are encountered in spatially-resolved techniques, where capillary probes are inserted into catalyst channels. They are also found in emerging electrified reactor concepts such as the SYPOX architecture, where heating wires are inserted within washcoated monoliths. In all these systems, the annulus eccentricity has a strong impact on flow distribution and mass transfer rates. In this work, a combined CFD–experimental approach is presented to quantify external mass transfer under third-kind boundary conditions for laminar flow in ducts with annular geometries with varying eccentricity. Sherwood numbers at the outer wall were obtained from CFD simulations and validated experimentally under full eccentricity (e* = 1) through rich-H2 oxidation over a Ni-promoted monolithic catalyst in the SYPOX reactor configuration. The experimentally derived Sherwood numbers showed excellent agreement with CFD predictions. A wide range of e* and outer to inner radius ratio (r*) was investigated with the validated CFD methodology and a novel correlation for calculation of average Sh numbers was derived.These results provide new reference data for the mass transfer–limited regime for this specific geometry, establishing a validated methodology for assessing external mass transfer in non-ideal geometries. These findings are relevant for the design and optimization of electrified and compact annular catalytic reactors operating under external mass transfer control.

External mass transfer in eccentric catalytic annular ducts: A CFD and experimental analysis for the third-kind boundary condition

Castiglione, Roberta;Ambrosetti, Matteo;Tronconi, Enrico;Groppi, Gianpiero
2027-01-01

Abstract

Annular reactors are a well-established configuration for kinetic investigations under high space velocity and high temperature conditions, where external mass transfer has an impact on the observed reaction rate. Comparable annular flow configurations are encountered in spatially-resolved techniques, where capillary probes are inserted into catalyst channels. They are also found in emerging electrified reactor concepts such as the SYPOX architecture, where heating wires are inserted within washcoated monoliths. In all these systems, the annulus eccentricity has a strong impact on flow distribution and mass transfer rates. In this work, a combined CFD–experimental approach is presented to quantify external mass transfer under third-kind boundary conditions for laminar flow in ducts with annular geometries with varying eccentricity. Sherwood numbers at the outer wall were obtained from CFD simulations and validated experimentally under full eccentricity (e* = 1) through rich-H2 oxidation over a Ni-promoted monolithic catalyst in the SYPOX reactor configuration. The experimentally derived Sherwood numbers showed excellent agreement with CFD predictions. A wide range of e* and outer to inner radius ratio (r*) was investigated with the validated CFD methodology and a novel correlation for calculation of average Sh numbers was derived.These results provide new reference data for the mass transfer–limited regime for this specific geometry, establishing a validated methodology for assessing external mass transfer in non-ideal geometries. These findings are relevant for the design and optimization of electrified and compact annular catalytic reactors operating under external mass transfer control.
2027
Annular reactor
CFD
Eccentricity
External mass transfer
Rich-H2 oxidation
File in questo prodotto:
File Dimensione Formato  
1-s2.0-S0009250926021603-main.pdf

accesso aperto

Descrizione: Research Article
: Publisher’s version
Dimensione 7.09 MB
Formato Adobe PDF
7.09 MB Adobe PDF Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11311/1332889
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 0
  • ???jsp.display-item.citation.isi??? 0
  • OpenAlex ND
social impact