It is important for aircraft design and certification to gather aeroelastic test data for system identification as close as possible to the critical flutter speeds. Such data are used for fine-tuning and validation of aeroelastic math models and the establishment of safety margins. Physically symmetric aircraft configurations usually exhibit both symmetric and antisymmetric flutter mechanisms. Both symmetric and antisymmetric mechanisms should, desirably, be studied by tests, especially if there is a potential for the flutter critical mechanism to switch from symmetric to antisymmetric due to configuration variations. A method is presented here, using active control, that allows the experimental identification of both the first symmetric and the first antisymmetric mechanisms of a physically symmetric configuration close to their flutter speeds. The aeroservoelastic wind-tunnel model used for demonstration has two flutter mechanisms in the operative range of the wind tunnel. With a proper design of active control laws, it is possible, after the first mechanism was studied experimentally, to increase dynamic pressure, reach, and experimentally identify the second flutter mechanism without modifying its behavior. Simple static output feedback control laws were used to suppress the symmetric and reach the antisymmetric flutter without affecting it and then to suppress the antisymmetric flutter. In addition to a successful demonstration of the concept, the paper also offers certain lessons and insights regarding active flutter suppression technology in general that are, hopefully, useful.

Symmetric/Antisymmetric Flutter Identification and Control Beyond the First Flutter Speed

Toffol, Francesco;Ricci, Sergio;
2026-01-01

Abstract

It is important for aircraft design and certification to gather aeroelastic test data for system identification as close as possible to the critical flutter speeds. Such data are used for fine-tuning and validation of aeroelastic math models and the establishment of safety margins. Physically symmetric aircraft configurations usually exhibit both symmetric and antisymmetric flutter mechanisms. Both symmetric and antisymmetric mechanisms should, desirably, be studied by tests, especially if there is a potential for the flutter critical mechanism to switch from symmetric to antisymmetric due to configuration variations. A method is presented here, using active control, that allows the experimental identification of both the first symmetric and the first antisymmetric mechanisms of a physically symmetric configuration close to their flutter speeds. The aeroservoelastic wind-tunnel model used for demonstration has two flutter mechanisms in the operative range of the wind tunnel. With a proper design of active control laws, it is possible, after the first mechanism was studied experimentally, to increase dynamic pressure, reach, and experimentally identify the second flutter mechanism without modifying its behavior. Simple static output feedback control laws were used to suppress the symmetric and reach the antisymmetric flutter without affecting it and then to suppress the antisymmetric flutter. In addition to a successful demonstration of the concept, the paper also offers certain lessons and insights regarding active flutter suppression technology in general that are, hopefully, useful.
2026
Feedback Control
Aircraft Components and Structure
Flight Control Surfaces
Structural Dynamics and Characterization
Aeroservoelastic Systems
Wind Tunnels
File in questo prodotto:
File Dimensione Formato  
TOFFF02-26.pdf

Accesso riservato

: Publisher’s version
Dimensione 6.19 MB
Formato Adobe PDF
6.19 MB Adobe PDF   Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11311/1332276
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? 0
  • OpenAlex ND
social impact