Traditionally, composite propellant grains, composed of crystalline oxidizers, metallic fuels, and a polymeric binder, are produced through a cast-cure process, which implies the use of a forming mandrel to shape the grain. This limits the production of complex shapes and delays rapid prototyping. Consequently, the method negatively affects the range of available mission profiles. In addition, the curing process requires isocyanates, highly toxic substances. A 3D-printing technology based on UV-curing and extrusion deposition, developed jointly by Space Propulsion Laboratory of Politecnico di Milano and Politecnico di Torino, can avoid the use of the mandrel and of isocyanates, fostering a greener and safer process. The new binder formulation involves the use of polybutadiene, instead of the traditionally employed hydroxyl-terminated polybutadiene. The curing occurs through a thiol-ene click reaction, initiated via photo-activation. Recent advancements concern the investigation of the aging behavior through accelerated aging under different conditions to evaluate long-term changes in mechanical and chemical properties. The evolution of binder properties is studied performing FTIR-ATR analyses, toluene dissolution tests, and dynamic mechanical analyses. Results show a gradual increase in the storage modulus E′ and in the curing efficiency, especially for samples stored under dry air. FTIR-ATR results reveal a variation in the intensity of peaks associated with–OH, C–O and C–C groups. The findings suggest the occurrence of an air oxidation reaction, but further investigations are still required. This testing campaign is essential to optimize the propellant formulation and to evaluate solid propellant in-situ, and eventually in-space, manufacturing and storage.
Advancements in UV-Cured Composite Solid Propellant Binders: Evaluation of Long-Term Behavior
Lucarno, Alessandra N.;Carlotti, Stefania;Maggi, Filippo
2025-01-01
Abstract
Traditionally, composite propellant grains, composed of crystalline oxidizers, metallic fuels, and a polymeric binder, are produced through a cast-cure process, which implies the use of a forming mandrel to shape the grain. This limits the production of complex shapes and delays rapid prototyping. Consequently, the method negatively affects the range of available mission profiles. In addition, the curing process requires isocyanates, highly toxic substances. A 3D-printing technology based on UV-curing and extrusion deposition, developed jointly by Space Propulsion Laboratory of Politecnico di Milano and Politecnico di Torino, can avoid the use of the mandrel and of isocyanates, fostering a greener and safer process. The new binder formulation involves the use of polybutadiene, instead of the traditionally employed hydroxyl-terminated polybutadiene. The curing occurs through a thiol-ene click reaction, initiated via photo-activation. Recent advancements concern the investigation of the aging behavior through accelerated aging under different conditions to evaluate long-term changes in mechanical and chemical properties. The evolution of binder properties is studied performing FTIR-ATR analyses, toluene dissolution tests, and dynamic mechanical analyses. Results show a gradual increase in the storage modulus E′ and in the curing efficiency, especially for samples stored under dry air. FTIR-ATR results reveal a variation in the intensity of peaks associated with–OH, C–O and C–C groups. The findings suggest the occurrence of an air oxidation reaction, but further investigations are still required. This testing campaign is essential to optimize the propellant formulation and to evaluate solid propellant in-situ, and eventually in-space, manufacturing and storage.| File | Dimensione | Formato | |
|---|---|---|---|
|
LUCAA01-25.pdf
Accesso riservato
:
Publisher’s version
Dimensione
6.65 MB
Formato
Adobe PDF
|
6.65 MB | Adobe PDF | Visualizza/Apri |
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.



