CO2-based Carnot battery systems are a promising solution for large scale, long duration energy storage, as they combine high round-trip efficiency with the absence of geological constraints, also enabling the storage of both hot and cold thermal energy. In this work, the optimal design criteria for a CO2-based Carnot battery are discussed, focusing on configurations where heat exchangers are shared between the charging and discharging phase (i.e. hot storage, cold storage and recuperator) and employing a hot storage based on a sensible solid medium. The system design and performances are modelled in MATLAB, investigating the round-trip efficiency, the energy density and the system footprint across a wide range of operative conditions and adopting realistic assumptions for the plant components performance. The optimized results, obtained from hundreds of simulated cases, demonstrate that with moderately low cycle maximum pressures (around 150 bar) and low cycle maximum temperatures (below 130 °C), the battery can already achieve a round trip efficiency over 55 %, reaching maximum values greater than 60 % for low cold storage temperatures (−30 °C). Differently, the energy density largely benefits from increasing the maximum pressure up to 250 bar, thanks to larger temperature variation in the hot thermal storage. Under these conditions, the system footprint is lower than 20 m2/MWhel, with energy densities as high as 11 kWhel/m3 for a cold storage temperature of 0 °C.

Optimal design of CO2 Carnot battery technology for long duration energy storage

Girelli, Simone;Alfani, Dario;Morosini, Ettore;Astolfi, Marco
2025-01-01

Abstract

CO2-based Carnot battery systems are a promising solution for large scale, long duration energy storage, as they combine high round-trip efficiency with the absence of geological constraints, also enabling the storage of both hot and cold thermal energy. In this work, the optimal design criteria for a CO2-based Carnot battery are discussed, focusing on configurations where heat exchangers are shared between the charging and discharging phase (i.e. hot storage, cold storage and recuperator) and employing a hot storage based on a sensible solid medium. The system design and performances are modelled in MATLAB, investigating the round-trip efficiency, the energy density and the system footprint across a wide range of operative conditions and adopting realistic assumptions for the plant components performance. The optimized results, obtained from hundreds of simulated cases, demonstrate that with moderately low cycle maximum pressures (around 150 bar) and low cycle maximum temperatures (below 130 °C), the battery can already achieve a round trip efficiency over 55 %, reaching maximum values greater than 60 % for low cold storage temperatures (−30 °C). Differently, the energy density largely benefits from increasing the maximum pressure up to 250 bar, thanks to larger temperature variation in the hot thermal storage. Under these conditions, the system footprint is lower than 20 m2/MWhel, with energy densities as high as 11 kWhel/m3 for a cold storage temperature of 0 °C.
2025
CO2 Carnot battery, Long duration energy storage, Pumped thermal energy storage, Round trip efficiency, Sensible solid energy storage, Thermodynamic analysis
File in questo prodotto:
File Dimensione Formato  
8a905d29-8685-44f6-90e1-b1f892209834.pdf

accesso aperto

Descrizione: Full Paper
: Publisher’s version
Dimensione 7.28 MB
Formato Adobe PDF
7.28 MB Adobe PDF Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11311/1294785
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 10
  • ???jsp.display-item.citation.isi??? 10
  • OpenAlex 10
social impact