The solidification of liquid oils (Shell Spirax and Nevastane EP 100) used as simulants of radioactive liquid organic waste (RLOW) in a specifically developed mix fly ash, blast furnace slag and metakaolin based geopolymer was studied in the present work. The process consists of obtaining the geopolymer paste slurry, produced by dispersing the solid precursors in the aqueous alkaline solution, and then adding RLOW via direct incorporation into the slurry under mixing to create an emulsion, before the geopolymer hardens. Geopolymer/oil composites have been prepared with various oil content (10, 20, 30 and 40 %v.), and subsequently characterized to verify their compliance with basic waste acceptance criteria. The positive role of the addition of a superplasticizer, to improve the fluidity of the paste, the density, and the homogeneity of the structure of geopolymer hardened materials was also demonstrated. The mechanical and engineering properties of the pastes and of solidified materials have been verified via rheological measurements and compressive strength tests. The optimized reference formulation loaded with 30 %v. oil waste has been tested in terms of raw materials variability and mixing proportion as part of a robustness study. Finally, the possibility to incorporate in the developed formulation other surrogated RLOW (tributyl phosphate/dodecane (30/70) and Liquid Scintillation Cocktail) has been studied with promising results.
Incorporation of organic liquid waste in alkali activated mixed fly ash/blast furnace slag/metakaolin-based geopolymers
Magugliani, Gabriele;Mossini, Eros
2024-01-01
Abstract
The solidification of liquid oils (Shell Spirax and Nevastane EP 100) used as simulants of radioactive liquid organic waste (RLOW) in a specifically developed mix fly ash, blast furnace slag and metakaolin based geopolymer was studied in the present work. The process consists of obtaining the geopolymer paste slurry, produced by dispersing the solid precursors in the aqueous alkaline solution, and then adding RLOW via direct incorporation into the slurry under mixing to create an emulsion, before the geopolymer hardens. Geopolymer/oil composites have been prepared with various oil content (10, 20, 30 and 40 %v.), and subsequently characterized to verify their compliance with basic waste acceptance criteria. The positive role of the addition of a superplasticizer, to improve the fluidity of the paste, the density, and the homogeneity of the structure of geopolymer hardened materials was also demonstrated. The mechanical and engineering properties of the pastes and of solidified materials have been verified via rheological measurements and compressive strength tests. The optimized reference formulation loaded with 30 %v. oil waste has been tested in terms of raw materials variability and mixing proportion as part of a robustness study. Finally, the possibility to incorporate in the developed formulation other surrogated RLOW (tributyl phosphate/dodecane (30/70) and Liquid Scintillation Cocktail) has been studied with promising results.| File | Dimensione | Formato | |
|---|---|---|---|
|
2024_NED_MIX-GP KIPT.pdf
accesso aperto
Dimensione
5.57 MB
Formato
Adobe PDF
|
5.57 MB | Adobe PDF | Visualizza/Apri |
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.


