It is well established that for organic photodetectors (OPDs) to compete with their inorganic counterparts, low dark currents at reverse bias must be achieved. Here, two rhodanine-terminated nonfullerene acceptors O-FBR and O-IDTBR are shown to deliver low dark currents at -2 V of 0.17 and 0.84 nA cm-2, respectively, when combined with the synthetically scalable polymer PTQ10 in OPD. These low dark currents contribute to the excellent sensitivity to low light of the detectors, reaching values of 0.57 μW cm-2 for PTQ10:O-FBR-based OPD and 2.12 μW cm-2 for PTQ10:O-IDTBR-based OPD. In both cases, this sensitivity exceeds that of a commercially available silicon photodiode. The responsivity of the PTQ10:O-FBR-based OPD of 0.34 AW-1 under a reverse bias of -2 V also exceeds that of a silicon photodiode. Meanwhile, the responsivity of the PTQ10:O-IDTBR of 0.03 AW-1 is limited by the energetic offset of the blend. The OPDs deliver high specific detectivities of 9.6 × 1012 Jones and 3.3 × 1011 Jones for OFBR- and O-IDTBR-based blends, respectively. Both active layers are blade-coated in air, making them suitable for high-throughput methods. Finally, all three of the materials can be synthesized at low cost and on a large scale, making these blends good candidates for commercial OPD applications.

Nonfullerene-based organic photodetectors for ultrahigh sensitivity visible light detection

Scaccabarozzi A. D.;
2020-01-01

Abstract

It is well established that for organic photodetectors (OPDs) to compete with their inorganic counterparts, low dark currents at reverse bias must be achieved. Here, two rhodanine-terminated nonfullerene acceptors O-FBR and O-IDTBR are shown to deliver low dark currents at -2 V of 0.17 and 0.84 nA cm-2, respectively, when combined with the synthetically scalable polymer PTQ10 in OPD. These low dark currents contribute to the excellent sensitivity to low light of the detectors, reaching values of 0.57 μW cm-2 for PTQ10:O-FBR-based OPD and 2.12 μW cm-2 for PTQ10:O-IDTBR-based OPD. In both cases, this sensitivity exceeds that of a commercially available silicon photodiode. The responsivity of the PTQ10:O-FBR-based OPD of 0.34 AW-1 under a reverse bias of -2 V also exceeds that of a silicon photodiode. Meanwhile, the responsivity of the PTQ10:O-IDTBR of 0.03 AW-1 is limited by the energetic offset of the blend. The OPDs deliver high specific detectivities of 9.6 × 1012 Jones and 3.3 × 1011 Jones for OFBR- and O-IDTBR-based blends, respectively. Both active layers are blade-coated in air, making them suitable for high-throughput methods. Finally, all three of the materials can be synthesized at low cost and on a large scale, making these blends good candidates for commercial OPD applications.
2020
High sensitivity
Nonfullerene acceptors
Organic photodetectors
Scalable fabrication method
Visible detection
File in questo prodotto:
Non ci sono file associati a questo prodotto.

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11311/1277166
Citazioni
  • ???jsp.display-item.citation.pmc??? 4
  • Scopus 45
  • ???jsp.display-item.citation.isi??? 44
social impact