The disposal of high volumes of organic waste is a global issue. Using organic waste instead of sand as an aggregate material for concrete could reduce the strain on waste treatment processes and on the extraction of finite resources. At the same time, it could be a climate change mitigation strategy, by storing the biogenic carbon contained in the organic waste. This project investigated the viability of replacing 10% of fine aggregate in concrete with various organic waste materials, namely rice husk ash, wood ash, corncob granules, and wheat straw. The fresh concrete’s properties were studied using the slump test, and the hardened concrete’s mechanical properties were measured using the compressive strength and flexural strength tests. In this study, 14 days of curing were considered for the mechanical tests, although the 28-day mechanical strength is more generally accepted. The mechanical performances along with a life cycle assessment (LCA) comparison between the concrete with organic waste and traditional concrete were conducted. The results suggested that rice husk ash and wood ash are the most-suitable organic waste products for use as aggregate replacers considering the mechanical properties. The concrete samples incorporating wheat straw and corncob granules exhibited relatively low strength; unless advanced treatment methods are applied to enhance the concrete’s performance, the utilization of these organic wastes in concrete may be limited. The environmental impact assessment of traditional concrete shows that the main contributor to almost every impact category is the production of Portland cement. Sand production contributes only marginally to the overall impact of the concrete. In terms of life-cycle greenhouse gas (GHG) emissions, traditional concrete exhibits the lowest GWP impact per cubic meter when mechanical properties are included in the functional unit used for the comparison. Nevertheless, concrete samples with wood ash and rice husk ash partially offset their lower compressive strength with higher carbon sequestration, showing a similar GWP impact to traditional concrete. This makes them promising alternatives, especially for cases where limited compressive strengths are needed. Further investigations to improve their mechanical properties and optimize their performance are warranted.

Concrete with Organic Waste Materials as Aggregate Replacement

Bertoldo, Nicolas;Dotelli, Giovanni
2023-01-01

Abstract

The disposal of high volumes of organic waste is a global issue. Using organic waste instead of sand as an aggregate material for concrete could reduce the strain on waste treatment processes and on the extraction of finite resources. At the same time, it could be a climate change mitigation strategy, by storing the biogenic carbon contained in the organic waste. This project investigated the viability of replacing 10% of fine aggregate in concrete with various organic waste materials, namely rice husk ash, wood ash, corncob granules, and wheat straw. The fresh concrete’s properties were studied using the slump test, and the hardened concrete’s mechanical properties were measured using the compressive strength and flexural strength tests. In this study, 14 days of curing were considered for the mechanical tests, although the 28-day mechanical strength is more generally accepted. The mechanical performances along with a life cycle assessment (LCA) comparison between the concrete with organic waste and traditional concrete were conducted. The results suggested that rice husk ash and wood ash are the most-suitable organic waste products for use as aggregate replacers considering the mechanical properties. The concrete samples incorporating wheat straw and corncob granules exhibited relatively low strength; unless advanced treatment methods are applied to enhance the concrete’s performance, the utilization of these organic wastes in concrete may be limited. The environmental impact assessment of traditional concrete shows that the main contributor to almost every impact category is the production of Portland cement. Sand production contributes only marginally to the overall impact of the concrete. In terms of life-cycle greenhouse gas (GHG) emissions, traditional concrete exhibits the lowest GWP impact per cubic meter when mechanical properties are included in the functional unit used for the comparison. Nevertheless, concrete samples with wood ash and rice husk ash partially offset their lower compressive strength with higher carbon sequestration, showing a similar GWP impact to traditional concrete. This makes them promising alternatives, especially for cases where limited compressive strengths are needed. Further investigations to improve their mechanical properties and optimize their performance are warranted.
2023
concrete; organic waste; sand; LCA; mechanical properties
File in questo prodotto:
File Dimensione Formato  
applsci-14-00108-v2.pdf

accesso aperto

: Publisher’s version
Dimensione 10.19 MB
Formato Adobe PDF
10.19 MB Adobe PDF Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11311/1257664
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 5
  • ???jsp.display-item.citation.isi??? ND
social impact