Pipeline Inspection Gauges (PIGs) are widely used for monitoring and managing pipeline integrity. During a pigging operation it is fundamental to have a continuous measurement of the PIG position and movement, in order to achieve the best inspection and to have an early warning in the case the device is stuck. Currently, the tracking is performed by installing on the PIG “active” systems (e.g. acoustic pingers or electromagnetic emitters) that communicate with a set of receivers, making it possible the localization of the travelling gauge. Another solution is the deployment of an appropriately dense network of sensors along the pipe track, or the utilization of a dedicated system/crew that moves close to the pipe, so to physically perceive the vibrations generated by the nearby passage of the device. In fact, the moving PIG produces pressure transients and vibro-acoustic noise due to the velocity fluctuations, to the friction against the internal walls and to the crossing of the welding dents. It is important to mention that the conduit acts like an acoustic waveguide and the “sound” generated by the PIG, in many practical situations, can be sensed within the fluid at several kilometres from the originating point. This paper presents three different tracking procedures that exploit the noise generated by the PIG to locate it, remotely and passively, without requiring any additional equipment to be mounted on the gauge. The key points of the procedures are the availability of pressure measurements at a small number of positions along the pipeline, at relative distances of tens of kilometres, an accurate synchronization of the measurements, the real time transmission and multichannel processing of the data. The first method locates the PIG by performing a crosscorrelation analysis between the acoustic signal recorded on opposite sides of the moving gauge, the second method is based on the counting of the transients generated at known positions, the third one describes the pipe section between the PIG and the arrival terminal like a resonant structure, and obtains the length of this section (the distance of the PIG to the arrival) from the resonance frequency. All the methods are presented starting from real examples, in order to highlight their effective applicability. Moreover, the localization results are in agreement with the output of more sophisticated technological solutions.
Acoustic detection and tracking of a pipeline inspection gauge
Bernasconi G.;
2020-01-01
Abstract
Pipeline Inspection Gauges (PIGs) are widely used for monitoring and managing pipeline integrity. During a pigging operation it is fundamental to have a continuous measurement of the PIG position and movement, in order to achieve the best inspection and to have an early warning in the case the device is stuck. Currently, the tracking is performed by installing on the PIG “active” systems (e.g. acoustic pingers or electromagnetic emitters) that communicate with a set of receivers, making it possible the localization of the travelling gauge. Another solution is the deployment of an appropriately dense network of sensors along the pipe track, or the utilization of a dedicated system/crew that moves close to the pipe, so to physically perceive the vibrations generated by the nearby passage of the device. In fact, the moving PIG produces pressure transients and vibro-acoustic noise due to the velocity fluctuations, to the friction against the internal walls and to the crossing of the welding dents. It is important to mention that the conduit acts like an acoustic waveguide and the “sound” generated by the PIG, in many practical situations, can be sensed within the fluid at several kilometres from the originating point. This paper presents three different tracking procedures that exploit the noise generated by the PIG to locate it, remotely and passively, without requiring any additional equipment to be mounted on the gauge. The key points of the procedures are the availability of pressure measurements at a small number of positions along the pipeline, at relative distances of tens of kilometres, an accurate synchronization of the measurements, the real time transmission and multichannel processing of the data. The first method locates the PIG by performing a crosscorrelation analysis between the acoustic signal recorded on opposite sides of the moving gauge, the second method is based on the counting of the transients generated at known positions, the third one describes the pipe section between the PIG and the arrival terminal like a resonant structure, and obtains the length of this section (the distance of the PIG to the arrival) from the resonance frequency. All the methods are presented starting from real examples, in order to highlight their effective applicability. Moreover, the localization results are in agreement with the output of more sophisticated technological solutions.File | Dimensione | Formato | |
---|---|---|---|
Acoustic detection and tracking of a pipeline inspection gauge_JPSE_2020_LOWRES.pdf
Accesso riservato
Descrizione: Articolo pubblicato
:
Publisher’s version
Dimensione
1.23 MB
Formato
Adobe PDF
|
1.23 MB | Adobe PDF | Visualizza/Apri |
I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.