Conceptualization and Prototype of an Anti-Erosion Sensing Revetment for Levee Monitoring: Experimental Tests and Numerical Modeling

The problem of levee embankment control during high flows is crucial for flood risk management in floodplains. Levee defense lines are often hundreds of kilometers long and surveys during emergencies are not easy tasks. For these reasons, levees monitored with in situ sensors and a suitable Information Technology (IT) real-time data communication and integration infrastructure, so-called “smart levees”, are gaining increasing interest as a crucial protection technology in floodplains. The paper presents the conceptualization of a prototype of a levee smart revetment, based on the integration of an optical fiber (OF) cable into a steel double-twisted wire mesh. In this paper the feasibility of this kind of revetment is firstly assessed. The flow pattern of overtopping water on the embankment is discussed, thus producing a raw estimation of the shear stress acting on the revetment in the field. A sample case is then analyzed in both numerical and laboratory tests. For this purpose, a numerical Finite Element Model (FEM) to describe the mechanical behavior of a double-twisted wire mesh when loaded along its own plane is presented. Numerical results indicate that the related strain, relatively low as compared to the steel wire yield stress, can be fully detected by the optical fiber continuous Brillouin sensor. This has been validated by the experimental activity performed and a digital twin of the prototype of the smart revetment, suitable for virtually testing the product under any load and constraint conditions and tailoring the production process, has been created.