In this work, the synthesis of a stable supported Pd catalyst by aggregation of colloidal particles (CPs) of polyacrylonitrile (PAN) containing the noble metal is discussed. The metal is initially incorporated during the polymerization reaction (0.5 wt. %) and results to be well embedded inside the polymeric structure and anchored to the nitrogen atom of acrylonitrile. Moreover, aiming to provide free access towards the catalyst active sites, a KOH-activated heat treatment was performed on the PAN CP aggregates, thus creating pore sizes between 0.7 and 5 nm with surface area SBET = 1150 m2/g. After the harsh heat treatment, the amount of Pd remaining in the pyrolyzed polymer is 2.8 wt. %, as measured by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES), which then corresponds to a total weight loss of 83% (assuming no loss of Pd). This result indicates a remarkable stability of Pd inside the polymer structure and that minimal Pd leaching can be expected during the catalyst use. X-ray absorption spectroscopic studies of pyrolyzed Pd-containing PAN and following extended X-ray absorption fine structure fitting showed no sign of bulk Pd(0), while a dominant proportion of Pd is present as dispersed Pd carbides. These results are consistent with the data obtained using X-ray absorption near edge structure. Finally, the catalyst was tested on a Suzuki coupling in the liquid phase and showed good activity, hence proving the accessibility of the active sites to reactants.

Research Update: Distribution and stabilization of Pd catalysts in porous carbon-based supports by aggregation of pre-doped colloidal particles

Storti G.;Morbidelli M.
2018-01-01

Abstract

In this work, the synthesis of a stable supported Pd catalyst by aggregation of colloidal particles (CPs) of polyacrylonitrile (PAN) containing the noble metal is discussed. The metal is initially incorporated during the polymerization reaction (0.5 wt. %) and results to be well embedded inside the polymeric structure and anchored to the nitrogen atom of acrylonitrile. Moreover, aiming to provide free access towards the catalyst active sites, a KOH-activated heat treatment was performed on the PAN CP aggregates, thus creating pore sizes between 0.7 and 5 nm with surface area SBET = 1150 m2/g. After the harsh heat treatment, the amount of Pd remaining in the pyrolyzed polymer is 2.8 wt. %, as measured by Inductively Coupled Plasma-Optical Emission Spectroscopy (ICP-OES), which then corresponds to a total weight loss of 83% (assuming no loss of Pd). This result indicates a remarkable stability of Pd inside the polymer structure and that minimal Pd leaching can be expected during the catalyst use. X-ray absorption spectroscopic studies of pyrolyzed Pd-containing PAN and following extended X-ray absorption fine structure fitting showed no sign of bulk Pd(0), while a dominant proportion of Pd is present as dispersed Pd carbides. These results are consistent with the data obtained using X-ray absorption near edge structure. Finally, the catalyst was tested on a Suzuki coupling in the liquid phase and showed good activity, hence proving the accessibility of the active sites to reactants.
2018
File in questo prodotto:
File Dimensione Formato  
final.pdf

accesso aperto

Descrizione: Articolo principale
: Publisher’s version
Dimensione 4.88 MB
Formato Adobe PDF
4.88 MB Adobe PDF Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11311/1129414
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 1
  • ???jsp.display-item.citation.isi??? 1
social impact