We present the design and preliminary characterization of a 32 x 32 SPAD time-gated imager in a 0.16 mu m BCD technology featuring an innovative pixel structure, composed of four single-photon detectors, independent event counters and a shared Time-to-Digital Converter (TDC). This approach allows our design to reach higher fill factor (9.6 % with a pixel pitch of 100 mu m) than typical SPAD imagers with in-pixel TDC, as well as reducing the power dissipation of the chip itself.The imager targets primarily LIDAR applications, but can also be employed in scientific and biomedical applications, and also features a photon-coincidence operation mode intended for rejection of background light. The developed imager performs simultaneous photon-counting and photon-timing operation and implements a 12 bit, 75 ps LSB flash-type TDC, able to perform one conversion per each gate window and up to 62 gates per acquisition frame (100 kfps maximum frame rate).The TDC structure is finely tunable, allowing to compensate for process variations and mismatches. Different readout modes allow to fit the requirements of different applications, trading-off the amount of provided data (e.g., only counting, only timing, both timing and counting) and the achievable frame rate. The readout scheme allows for easy tiling into large imagers and avoids the readout speed bottleneck typically found in standard row select / column select approaches.

Time-gated CMOS SPAD array in 0.16 μm BCD with shared timing electronics and background light rejection for LIDAR applications

Portaluppi D.;Conca E.;Villa F.;Zappa F.
2018-01-01

Abstract

We present the design and preliminary characterization of a 32 x 32 SPAD time-gated imager in a 0.16 mu m BCD technology featuring an innovative pixel structure, composed of four single-photon detectors, independent event counters and a shared Time-to-Digital Converter (TDC). This approach allows our design to reach higher fill factor (9.6 % with a pixel pitch of 100 mu m) than typical SPAD imagers with in-pixel TDC, as well as reducing the power dissipation of the chip itself.The imager targets primarily LIDAR applications, but can also be employed in scientific and biomedical applications, and also features a photon-coincidence operation mode intended for rejection of background light. The developed imager performs simultaneous photon-counting and photon-timing operation and implements a 12 bit, 75 ps LSB flash-type TDC, able to perform one conversion per each gate window and up to 62 gates per acquisition frame (100 kfps maximum frame rate).The TDC structure is finely tunable, allowing to compensate for process variations and mismatches. Different readout modes allow to fit the requirements of different applications, trading-off the amount of provided data (e.g., only counting, only timing, both timing and counting) and the achievable frame rate. The readout scheme allows for easy tiling into large imagers and avoids the readout speed bottleneck typically found in standard row select / column select approaches.
2018
Proceedings of SPIE - The International Society for Optical Engineering
9781510618299
9781510618305
Photon Counting; Single Photon Imaging; Smart pixel; SPAD; TCSPC; Time gating; Time-of-Flight; sezele
File in questo prodotto:
File Dimensione Formato  
2018 SPIE.pdf

accesso aperto

: Post-Print (DRAFT o Author’s Accepted Manuscript-AAM)
Dimensione 1.03 MB
Formato Adobe PDF
1.03 MB Adobe PDF Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11311/1121530
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 2
  • ???jsp.display-item.citation.isi??? 0
social impact