The application of CO2power cycles is advantageous to exploit high-temperature sources (500-800°C) in the case of available low-temperature heat sinks (15-25°C). However, their efficiency is strongly reduced for higher heat sink temperatures. At these temperatures, due to the low-critical temperature of CO2(about 31°C), CO2is in fact compressed in the supercritical vapor phase rather than in the liquid phase, thus increasing energetic demand for compression. One of the solutions envisaged to overcome this problem is the addition of one or more chemicals that allow having a mixture with a higher critical temperature than the one of pure CO2. This preserve the working fluid compression in its liquid phase, even in the case of heat sinks with temperatures greater than 25°C. This research shows that the addition to CO2of a properly selected chemical component enables to increase the critical temperature up to 45°C with relevant improvements of cycle efficiency with respect to pure-CO2power cycles. In particular, it summarizes the most relevant criteria to be accounted for when selecting CO2-additives. Moreover, the paper warns of the thermodynamic effects deriving from adding to CO2a second characterized by a much more high critical temperature, such as the occurrence of infinite-pressure critical points and multiple-phase liquid-liquid and vapor-liquid critical points. Finally, the paper analyses the thermodynamic properties of a high-critical temperature CO2-based mixture, suitable for these applications, that presents multiple phase critical points. In this regard, it is specified that the paper also aims at filling a knowledge gap in the study of thermodynamic properties of mixtures presenting how do enthalpy and specific volume change in response to pressure variations in the event of liquid-liquid and vapour-liquid critical points. Finally, we present the comparison between performances of power cycles which use, as working fluid, either pure CO2or the novel designed higher temperature CO2-based mixture.

The design of CO2-based working fluids for high-temperature heat source power cycles

Bonalumi, D.;Macchi, E.;
2017-01-01

Abstract

The application of CO2power cycles is advantageous to exploit high-temperature sources (500-800°C) in the case of available low-temperature heat sinks (15-25°C). However, their efficiency is strongly reduced for higher heat sink temperatures. At these temperatures, due to the low-critical temperature of CO2(about 31°C), CO2is in fact compressed in the supercritical vapor phase rather than in the liquid phase, thus increasing energetic demand for compression. One of the solutions envisaged to overcome this problem is the addition of one or more chemicals that allow having a mixture with a higher critical temperature than the one of pure CO2. This preserve the working fluid compression in its liquid phase, even in the case of heat sinks with temperatures greater than 25°C. This research shows that the addition to CO2of a properly selected chemical component enables to increase the critical temperature up to 45°C with relevant improvements of cycle efficiency with respect to pure-CO2power cycles. In particular, it summarizes the most relevant criteria to be accounted for when selecting CO2-additives. Moreover, the paper warns of the thermodynamic effects deriving from adding to CO2a second characterized by a much more high critical temperature, such as the occurrence of infinite-pressure critical points and multiple-phase liquid-liquid and vapor-liquid critical points. Finally, the paper analyses the thermodynamic properties of a high-critical temperature CO2-based mixture, suitable for these applications, that presents multiple phase critical points. In this regard, it is specified that the paper also aims at filling a knowledge gap in the study of thermodynamic properties of mixtures presenting how do enthalpy and specific volume change in response to pressure variations in the event of liquid-liquid and vapour-liquid critical points. Finally, we present the comparison between performances of power cycles which use, as working fluid, either pure CO2or the novel designed higher temperature CO2-based mixture.
2017
CO2-based mixtures; Critical points; High-temperature heat source; Power cycles; Energy (all)
File in questo prodotto:
File Dimensione Formato  
Bonalumi_Lasala_mix-2017.pdf

accesso aperto

Descrizione: Articolo pubblicato in rivista
: Publisher’s version
Dimensione 6.09 MB
Formato Adobe PDF
6.09 MB Adobe PDF Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11311/1036033
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 10
  • ???jsp.display-item.citation.isi??? 8
social impact