Micro-cogeneration Stirling engines are considered promising for residential applications. The present work covers the experimental and numerical analysis of a commercial Stirling unit capable of 8 kW of hot water and 1 kW of electricity. A previously concluded experimental campaign that focused on external measurements is extended here to include internal measurements. The scope is collecting useful data to validate a detailed numerical model. Three test cases are considered by fixing the temperature of the cogeneration water at the unit inlet at alternatively: 30, 50 and 70°C. Mass flow rate of the water is kept at the nominal value of 0.194 kg/s. This numerical model is an extension of the well-known work by Urieli and Berchowitz. The model is calibrated on the 50°C case and compared in the other two cases. Maximum deviations with respect to experiments are about 4% on net power output, whereas they remain below 1% on heat input and rejection. The Stirling unit has shown an electrical efficiency exceeding slightly 9% and a thermal efficiency of 90% (both based on the Higher Heating Value) if the cogeneration water inlet temperature is 30°C, which decreases down to about 84% with water inlet at 70°C. The Primary Energy Index is remarkably positive for all cases, ranging from 17% to 22% as the temperature of the water inlet goes from 70°C to 30°C.

Experimental and numerical study of a micro-cogeneration Stirling engine for residential applications

VALENTI, GIANLUCA;SILVA, PAOLO;FERGNANI, NICOLA;DI MARCOBERARDINO, GIOELE;CAMPANARI, STEFANO;MACCHI, ENNIO
2014-01-01

Abstract

Micro-cogeneration Stirling engines are considered promising for residential applications. The present work covers the experimental and numerical analysis of a commercial Stirling unit capable of 8 kW of hot water and 1 kW of electricity. A previously concluded experimental campaign that focused on external measurements is extended here to include internal measurements. The scope is collecting useful data to validate a detailed numerical model. Three test cases are considered by fixing the temperature of the cogeneration water at the unit inlet at alternatively: 30, 50 and 70°C. Mass flow rate of the water is kept at the nominal value of 0.194 kg/s. This numerical model is an extension of the well-known work by Urieli and Berchowitz. The model is calibrated on the 50°C case and compared in the other two cases. Maximum deviations with respect to experiments are about 4% on net power output, whereas they remain below 1% on heat input and rejection. The Stirling unit has shown an electrical efficiency exceeding slightly 9% and a thermal efficiency of 90% (both based on the Higher Heating Value) if the cogeneration water inlet temperature is 30°C, which decreases down to about 84% with water inlet at 70°C. The Primary Energy Index is remarkably positive for all cases, ranging from 17% to 22% as the temperature of the water inlet goes from 70°C to 30°C.
2014
File in questo prodotto:
File Dimensione Formato  
ATI2013-EGYPRO-Final.pdf

Accesso riservato

: Publisher’s version
Dimensione 626.95 kB
Formato Adobe PDF
626.95 kB Adobe PDF   Visualizza/Apri
Experimental and numerical study of a micro-cogeneration Stirling engine_11311-772116_Valenti.pdf

accesso aperto

: Post-Print (DRAFT o Author’s Accepted Manuscript-AAM)
Dimensione 553.22 kB
Formato Adobe PDF
553.22 kB Adobe PDF Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11311/772116
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus 35
  • ???jsp.display-item.citation.isi??? 25
social impact