Residual and dedicated energy crops, such as sorghum, are suitable substrates for anaerobic digestion in agricultural biogas plants. However, their complex structure justifies the use of a pretreatment to improve their anaerobic biodegradability. Thus, the aim of this study was to investigate the impact of particle size reduction on structural changes and methane production from ensiled sorghum forage, with and without the addition of sodium hydroxide. Sorghum samples were ground into particles with mean diameters of 994, 471, 269 and 169 μm. Milled samples with 471 and 169 μm particle sizes were soaked in a NaOH solution at 10% gNaOH/gTS dosage and maintained at 55°C for 12 h. BMP tests were performed on all samples. All results are discussed both in terms of specific methane production and kinetic constants. The main conclusion is that milling did not improve methane production (275.3± 3.5 mLCH4/gVS) nor kinetic constants (0.11±0.01 d-1) between 994 and 169 μm. On the contrary, by adding sodium hydroxide, an increase in both methane yield (324.5±0.7 mLCH4/gVS) and kinetic constants (0.16 ± 0.00 d-1) was observed, but these results were not influenced by the particle size. Chemical and infra red spectroscopy (FTIR) analysis were performed to characterize the samples and explain these results.

Effect of particle size on alkaline pretreatment and methane production of ensiled sorghum forage.

SAMBUSITI, CECILIA;FICARA, ELENA;MALPEI, FRANCESCA;
2012-01-01

Abstract

Residual and dedicated energy crops, such as sorghum, are suitable substrates for anaerobic digestion in agricultural biogas plants. However, their complex structure justifies the use of a pretreatment to improve their anaerobic biodegradability. Thus, the aim of this study was to investigate the impact of particle size reduction on structural changes and methane production from ensiled sorghum forage, with and without the addition of sodium hydroxide. Sorghum samples were ground into particles with mean diameters of 994, 471, 269 and 169 μm. Milled samples with 471 and 169 μm particle sizes were soaked in a NaOH solution at 10% gNaOH/gTS dosage and maintained at 55°C for 12 h. BMP tests were performed on all samples. All results are discussed both in terms of specific methane production and kinetic constants. The main conclusion is that milling did not improve methane production (275.3± 3.5 mLCH4/gVS) nor kinetic constants (0.11±0.01 d-1) between 994 and 169 μm. On the contrary, by adding sodium hydroxide, an increase in both methane yield (324.5±0.7 mLCH4/gVS) and kinetic constants (0.16 ± 0.00 d-1) was observed, but these results were not influenced by the particle size. Chemical and infra red spectroscopy (FTIR) analysis were performed to characterize the samples and explain these results.
2012
The 4th International Conference on Engineering for Waste and Biomass Valorisation (WasteEng12) PROCEEDINGS (Vol 2)
9791091526005
File in questo prodotto:
File Dimensione Formato  
FP_WE-215[1].pdf

Accesso riservato

: Altro materiale allegato
Dimensione 39.22 kB
Formato Adobe PDF
39.22 kB Adobe PDF   Visualizza/Apri

I documenti in IRIS sono protetti da copyright e tutti i diritti sono riservati, salvo diversa indicazione.

Utilizza questo identificativo per citare o creare un link a questo documento: https://hdl.handle.net/11311/691123
Citazioni
  • ???jsp.display-item.citation.pmc??? ND
  • Scopus ND
  • ???jsp.display-item.citation.isi??? ND
social impact