Standby and Off-Mode Energy Losses In New Appliances Measured in Shops

This document provides an overview of the most important results of the Intelligent Energy Europe (IEE) Project SELINA – Standby and Off-Mode Energy Losses In New Appliances Measured in Shops. Standby power is a general term commonly used to describe the low power modes in which many electrical and electronic products are, when not performing their main function. For more than a decade, it has been recognized that the energy consumption in low power modes for electrical and electronic products is an important issue because it represent permanent loads (sometimes up to 24 hours per day) of a huge number of products. With the 1 W standby initiative of the International Energy Agency (IEA), several low power mode measurement campaigns have been led on a regular basis in a number of countries outside and inside Europe Union (EU). Based on these results and on the Energy-using Products Study Lot 6, the EU has prepared new regulation to limit the standby and off-mode power consumption of non-networked household electronic and electrical equipment, which is being applied since January 2010. The IEE project SELINA carried out a large scale monitoring campaign in shops in order to characterise the low power modes of new appliances being sold in the EU market. In order to ensure consistency of the collected data, a common measurement methodology was developed and the same high resolution measurement equipment was used by all partners. This document analyzes the results of more than 6000 different equipments measured in the 12 EU countries involved in the project. Standby and off-mode values by product categories were analysed and compared with data from other regions of the World. The measurements were also benchmarked against the new 2010/2013 EU standby and off mode regulation thresholds and the impact of the EU regulation is discussed.